LS-650A introduce

1. Feeding gluing machine mainly adopts vacuum suction and blowing at the front end of the paper to suck and transport the paper, and the conveying is stable and accurate;

2. The main engine is controlled by frequency conversion, equipped with timing start automatic heating and constant temperature system;

3. The conveyor belt is equipped with a strong suction device to avoid bending, deformation and displacement of the paper after being glued;

4. It is suitable for hot melt adhesive and cold adhesive, the glue is applied evenly without wrinkling, and there is less waste in recycling, which can effectively improve production efficiency and save costs.

Machine parameters:

Machine feature:

1. The paper feeding part of this machine adopts the push-back type, and the paper is smooth without skewing.

2. Adopt PCL control, easy to operate.

3. The glue barrel is designed to keep the glue viscosity in use.

4. Stainless steel rollers are used for gluing to ensure even gluing.

5. The conveyor belt can be stopped and positioned, which can provide a good solution when making boxes.

After the power is turned on, the entire conveyor belt starts to move, and the die-cut semi-finished carton is placed in the paper feeding position of the folder-gluer, and the conveyor belt automatically sends the single box to the middle section according to the paper feeding guide set by the paper stopper. The belt (if the semi-finished carton has been treated with film or glazing, after entering the middle section, the carton can be glued on the inner edge by a glue gun at the same time) the conveyor belt transports the carton to the back gluer for pressure packaging.